Re: Simple moment applied to shaft, all rotational calcs = 0.00000
I had 79.3e9 N/m^2. Converting it to N/mm^2 should be 79.3e3. That's what I was calling kPa. Sorry for the confusion. I thought it was close enough. You have any ideas why we're getting different...
View ArticleRe: Vericut version for Creo 3
It will most likely be 7.2 my understanding is that they PTC & CGTech don't have a cooperation agreement anymore, I base this on my dealings with both rep's when I have been dealing with issues....
View ArticleRe: Simple moment applied to shaft, all rotational calcs = 0.00000
Can you post your model?
View ArticleRe: Simple moment applied to shaft, all rotational calcs = 0.00000
Sure thing. Thanks again.
View ArticleRe: Simple moment applied to shaft, all rotational calcs = 0.00000
OK, I found your mistake. The material properties in your FEM are E = 200 GPa and nu = 0.33, which results in G = 75.19 GPa (not 79.3 GPa). If I use 75.19 GPa instead of 79.3 GPa in my previous...
View ArticleRe: Simple moment applied to shaft, all rotational calcs = 0.00000
Great. Thanks...again!
View ArticleRe: damaged file
Hi Carlos, There is no User's Guide or Reference Guide in electronic form (like .PDF or so), a User's Guide (or so) did exist in paper; don;'t know about a (separate?) Reference Guide.There are, as...
View ArticleClik here to view.
Re: How can I express matrix?
Werner Exinger wrote: Mike Armstrong wrote: jinsuk Lee wrote: I am going to use 'range variable' to do my work because I saw book about mathcad that it suggest user to use 'range variable' for...
View ArticleRe: URGENT creo student license doesn't work with 3.0
I didn't see that, the link please? Do you know what else we could do if that doesn't work?
View ArticleRe: Drop Down Menus
You could have a look here. Fresh news from blog. Post "PTC Mathcad Prime: Past, Present, Future": http://feedproxy.google.com/~r/Mathcad/~3/rYfldS_ICoM/
View ArticleRe: Using a dash "-" in cli script
Hmm that's strange then. I was able to run the same command in my Windows environment against both my 9.7 and 10.5 environments. You should open a case to have PTC Technical Support take a closer look...
View ArticleRe: Problem with explicit function including excel file - Mathcad Prime 3.0
Mike Armstrong wrote: Very strange indeed. The symbolic processor is identifying the unit and then stripping it by dividing by the base SI unit. Most certainly a big and need reporting.Guess the...
View ArticleClik here to view.
Re: How can I express matrix?
Your crystal ball working again Great assumption, but yet again we are guessing. Jinsuk Lee has not even responded to this thread, which he should have before creating a new one....
View ArticleRe: Copying family tables along with drawing and assembly. "Save a copy"
Brian, what issue do you have when you use the save as in Windchill?
View ArticleRe: Problem with explicit function including excel file - Mathcad Prime 3.0
Werner Exinger wrote: Mike Armstrong wrote: Very strange indeed. The symbolic processor is identifying the unit and then stripping it by dividing by the base SI unit. Most certainly a big and need...
View ArticleClik here to view.
Re: Creo 3.0 for FIRST is coming soon
Josh, No we haven't heard anything about the installer thus far. What's the problem that you are experiencing? If you're still experiencing an issue, send me an email at mcheli@ptc.com
View ArticleRe: Solving an Equation
Werner Exinger wrote: There are some errors: 4) Unit problems: N.f^(2b) should yield pressure^2 and N.f1(b+c) should yield dimension pressure for the equation to be unit consistent. This would mean...
View Article