Re: Creo 2.0 "Family Tables"
Jose, That is a helpful answer; however, I have 40 columns in this Family Table. Why can't we move columns around in Excel? or Insert Columns where we can? Things to think about.... Thank you Ray
View ArticleTrying to make a sheet metal part
Hello PTC Community! I am trying to learn a thing or two about PTC modelling before I have an interview for a mechanical designer position in which I would be modelling in PTC. I am totally new to PTC...
View ArticleRe: Rotate parts in an exploded view? Wildfire 4.
If the hinge is an assembly, you can rotate it in the explode process. If it was just a part, you either need a flexible state of the hinge in a family table or the hinge itself is a family table...
View ArticleClik here to view.
Re: Solving an Equation
AlanStevens wrote: Werner Exinger wrote: There are some errors: 4) Unit problems: N.f^(2b) should yield pressure^2 and N.f1(b+c) should yield dimension pressure for the equation to be unit consistent....
View ArticleRe: Rotate parts in an exploded view? Wildfire 4.
the hinge is an ASM...my problem is dont know how to rotate it in the explode dialog...
View ArticleRe: PTC Creo 3.0 Now Available!
This is great news, several of the enhancements will be very useful in schools. Am I correct in thinking the 'Schools' configuration uses inches and ASMI drawing standards? If so, this will cause...
View ArticleClik here to view.
Re: F - distribution trouble
Shouldn't you rather user the cumulative probability pF() instead of the probability density dF()?
View ArticleRe: PTC Creo 3.0 Now Available!
Hi Mark,As James mentions, it would be helpful to have the feature set of each license. Previously, local FIRST, FRC teams had access to what I believe is now the "Academic Edition". I've seen them...
View ArticleClik here to view.
Sequence of operations welding symbology in Creo Parametric drawings
Hi, I am looking for some details regarding Creo's default welding symbols when making drawings. Specifically what I am trying to indicate is that I would like two parts to be spot welded with a small...
View ArticleRe: Tolerances In Values
Hi Matt, maybe the attached helps you, or someone else. I guess the limitations are:- The assumption that the extremes of output occur when all component values are at one end of their tolerance range...
View ArticleRe: Trailmaker 0.3
You´re right, I tested it here, and sometimes it doesn´t work correctly. I have to enhance it a little bit more. But not for now, I´m short in time... Jose
View ArticleRe: Creo 3 Intelligent Fastener Extension - Not in Windchill
Jim, That is fine if you have an unconfigured Windchill, but we actually have a lot more parameters for our EPMDocuments. Including the most important wich is Part Number. With the current...
View ArticleRe: Tips for text
Agree with your caviats Antonius and especially the don't use unless there is a very good reason. The same syntax used in a note also works to overwrite a dimension, but generally speaking would be a...
View ArticleRe: Mold Design
Yes i think so.. The problem is that its my teacher was not clear about the subject. He just told me to disighn this mold so when i asked him if anything else is needed he sent me the pasted text above...
View ArticleClik here to view.
Re: Adding a zero before a decimal dimension?
I wonder if that was some kind of bug or other anomaly. Creo 2.0 option... this one is from the model properties. The options are identical in the drawing setup.
View ArticleRe: Sequence of operations welding symbology in Creo Parametric drawings
I haven't seen anything like that but it makes sense. If you want to avoid making them, you could try using the "3rd operation" leader on one symbol, and add others that are placed without leaders....
View ArticleRe: Mold Design
What is this class for, mold design or CAD training? Do you have the mold extension? You can search the PTC University for how to use the mold tool....
View ArticleRe: problem with buckling / snap through (FR : flambement / cloquage)
Good points, Mats. "I can run a similar example without problem. I do not use the "snap through"-option. If I use this I too get an error message. " I've noticed that there appears to be something...
View ArticleRe: Problem to shell , Probleme beim schalen
Hello highway45, thanks for your fast reply.Your answer is the first hint.I will examine this.
View ArticleRe: Creo 3.0 for FIRST is coming soon
I'm experiencing the same problem re. not being able to open parts and assemblies created with Creo 2. I've attached a zip - it happens when trying to open either part or assembly. Thanks!Dan Holt#7300...
View Article