Re: Assembly constraints
By setting the config options per a reply from Stephen Williams2 comp_angle_offset_eps = 91comp_normal_offset_eps = -1auto_constr_always_use_offset = never Assembly works...
View ArticleAssembly mode, pick the parent, not the child
Hi All, is there a config setting, so that when I do my assemblies, i can pick the assembly, and not the part / child of the inteded sub assembly? I have an assembly, and in that assembly I have parts...
View ArticleRe: Mathcad 6.0 + and Windows 7
I have written a special utility that will allow you to save mathcad 6 worksheets in windows 7 and later edit and save them again. My program saves the content of clipboard as a binary file . Later the...
View ArticleRe: Assembly constraints
They are already implemented. Use the following config.pro options: For eliminating the normal constraint from happening by default: comp_angle_offset_eps 91comp_normal_offset_eps -1 Add this option to...
View ArticleNo access to support or software downloads
Hi you all, i´ve got a problem!When I try to access to software downloads, or even to support, i got the following message:access denied– Berechtigungen nicht ausreichend Ihr Web-Account verfügt nicht...
View ArticleRe: Assembly mode, pick the parent, not the child
I don't believe there is a setting. Best answer other than the already mentioned right click select parent is right click - pick from list to get the query select box to come up. It gives you a...
View ArticleRe: Edit Creo Relations with Notepad++ instead of the default editor
no but I did come across this! https://github.com/VonOx/npp-pro
View ArticleRe: Material file database (again)
dear anthony, i have seen your video. thats very helpful to me. i am also doing nonlinear analysis in creo.. but my design studys are failed due to some mesh problem. if you dont mine plz give me your...
View ArticleImplementer 10.2 - Where do I find a listing of what the return codes mean?
I'm getting the following message: Communication to remote system failed with a return code of 530. Where do I find a listing of what the return code means?
View ArticleRe: Edit Creo Relations with Notepad++ instead of the default editor
Ryan, That looks useful, but after trying a few different ways am not able to import the file into Notepad++. I get the Error "Fail to import." Were you able to download these and get them to work? I...
View ArticleStriped wires in Creo Schematic and cabling
Are their any plans to support striped wires in Creo Schematics or Creo Cabling in the future? I realize there are work arounds, but that isn't the question.Right now you can just fake the text in...
View ArticleRe: 2variable Given... Find involving complex matrix determinant
Oh wow, that was spectacularly obvious. Very much appreciated indeed!
View ArticleRe: We are going to make the transition from AutoCAD to Creo...
Brian, Do you know of any walkthrough for the initial setup of the Piping and Cabling extension? It doesn't have to be majorly in depth, but an overall process would be a good reference for me, as I...
View ArticleRe: We are going to make the transition from AutoCAD to Creo...
By the way, by initial setup, I mean building my catalogs/libraries. I've already installed the extension.
View ArticleRe: Unknown element in start tag
From your original post, it looks like the file was working before and is now giving errors after changes were made. Do you know the nature of the changes? Were they to the SGML itself? Can you provide...
View ArticleAdding Terrain Cross Section to Creo 2 drawing
Hello, Part of what I do involves preparing general arrangement drawings for my company's product at installation sites. What i currently do is I use use lines, splines, points and rectangles...
View ArticleRe: Drawing Standards - BS 8888:2013 therefore BS EN ISO 128
Hi folks, Has there been any feedback/progress on this? James Collin has produced some fantastic Creo standards files that everyone in Edinburgh is using. It would be great if they could be updated in...
View ArticleRe: Adding Terrain Cross Section to Creo 2 drawing
I would suggest any manageable curve element in a drawing be created in model sketches.This allows full control and parametric relations. These sketches can also serve to make templates for your...
View ArticleRe: LDA, Only one core used?
We have implemented a ramdisk via IMdisk on the same computer and it increased the speed by 5 fold! 10 minute iterations are now only taking 2 minutes! Amazing! However the CPU load only increased from...
View ArticleAcademic license for Creo 3.0
Hello, my team has a CNC machine and as Creo 2.0 users we would use the machining portion of creo to create toolpaths for our machine to use. However, ever since the change from 2 to 3, we no longer...
View Article