Creo 3 - Licence request failure
I have installed Creo 3 - this time I have got it to open up the latest version but I am receiving the licence request failure message. I used the educational standalone and removed all previous...
View ArticleClik here to view.
Re: Is there method fastly to solve about "condition" ?
thank you. anyway Do you mean this picture about trapezoid?
View ArticleRe: Mass Transfer at a suspended Sphere - Coupling of Convective and...
Try the attached. Message was edited by: HARVEY HENSLEY added s(t) plot
View ArticleRe: large number of inputs
PAYMAN RAJAI wrote: Thank you Werner, as you mentioned the issue is probably from reading a large number of inputs . No, its not the number of input files. But the more calculations you make, the...
View ArticleClik here to view.
Re: Is there method fastly to solve about "condition" ?
Thats nonsense! What are you using the indices for here?? In the meantime you should really know more about vectors and indices!!I was talking about somthing like this: and concerning ar and ar' about...
View ArticleRe: Graphic Error(or Crash) in Creo Parametric 2.0
Hanak, thanks for your help, but it didn't work. can you give me other solution? thanks anyway.
View ArticleRe: Is there method fastly to solve about "condition" ?
thank you... But don't get me wrong.. I just posted past my file, not present my file.so it exist indices such as i, j, k. anyway thank you for help continually.
View ArticleClik here to view.
Re: PROE on Virtual XP in Windows 7
Hi Bruce, Yup i manage to run Proe2001 but i got error when grabbing the license from the Network. Could be a license compatibility issue not really sure. Thanks,Reuben
View ArticleRe: Is there method fastly to solve about "condition" ?
In case you are interested why the intergral took so long:Thanks to your heavily nested functions the calculation of a single value of t() requires evaluationg the solve block(s) for ar resp. a'r 15...
View ArticleRe: Is there method fastly to solve about "condition" ?
I am sorry I can't understand almost....anyway thank you for consideration.
View ArticleRe: Basic mechanism question
Do we, as non-MDO owners, have collision detection?That would make it easier. Maybe the limits in your constraint can be your stop if collision is not an option. Cam motion gives you a bit of added...
View ArticleRe: Vector solve
You can't use a solve block that way. If you have multiple cases to solve for you have to turn the solve block into a function, and then apply the function to the multiple cases. You have a more...
View ArticleIs it possible to calculate impact between two moving bodies in Mechanica?
Hi everyone. I have worked on dynamic analysis for a single part/assembly but was curious if the Mechanica can analyse impact between two moving bodies. Regards,Lucky
View Article"Drainage slope" in Creo?
Hello all! First time poster here and also a recent graduate, so I might not even be using the proper terminology. I'm making a series of tanks that share walls, with "built-in drainage" since it'll...
View ArticleRe: Using Interchange assembly for an Sub-assembly using Pro/Program
I have changed the code as "700DEPTH.PRT". but still it shows the same error
View ArticleRe: Using Interchange assembly for an Sub-assembly using Pro/Program
The "SMK0002XXX1" & "SMK0002XXX1" are instances of generic component "SMK0002XXXX" which shares the same reference only. I need to replace those components according my input. So, only I used this...
View ArticleRe: Vector solve
You can't use a solve block that way. Why not? I think that Jonathan had worked out a solution which works pretty well and followed the vectorial approach, Adrien had tried to use.Nevertheless I, too,...
View ArticleClik here to view.
"solve block" is strange.
I solve my results. first, I thought I proceed my work to be right. But Suddenly, I thought my work is not right when I compared 4 result values in picture.I thought a, a' increase and solve block...
View ArticleRe: Using Interchange assembly for an Sub-assembly using Pro/Program
What did the section look like before you editted it? I also noticed you had used "700 DEPTH" with a " " and not "700DEPTH"
View ArticleClik here to view.
Re: "Drainage slope" in Creo?
* I should add that my files are created in the full version of Creo, not the student version so you'll be able to open it. Also, to make things easier, I'm putting a screenshot as well. I think that...
View Article