Re: Sketcher difficulties
Welcome ot the forum, Amy. This is easily possible. Know that the left end of the R80 is not tangent to horizontal. The beauty of paramteric sketching is that it often solves itself... not as in the...
View ArticleRe: Creo Sheetmetal Unbend Feature Failure
That is my experience as well, Hafeez. I find it absolutely frustrating to try to use the advanced features where rip rarely does what I want it to do. However, some people can really shine with the...
View ArticleClik here to view.
Re: Creo Sheetmetal Unbend Feature Failure
When I look back at your first images, you are revolving some of your cuts where the edge if the metal is not "square". This is a machining process that causes angled edges in the flat pattern. Where...
View ArticleClik here to view.
Re: Help with system of equations.
Oh yes it does. Thanks Alan, and you too Valery. I'm sorry that I took my time to answer but my router got screwed up. Thanks again.
View ArticleRe: Mathcad 11 or Mathcad 14 running under Windows 7?
Hi Wolfgang, see http://communities.ptc.com/message/206558#206558 for possibly an alternative route. Success!Luc
View ArticleModelCHECK Status folder
Hello! I need some help about the MC configuration folders, for some constraints in the ProE configuration in my company.I can not update the STATUS folder in the ModelCHECK CONFIG folder, so my...
View ArticleClik here to view.
Re: Stack the range variables
Thank you for your reply. Now the definition is clear to me. I have a follow up question. I have a vector 2048 rows and 1 column. I want to remove the data points at 131 row through 200 row. That is...
View ArticleRe: how to save as new mirror part in different planes
Hi Jack, As Steven mentioned currently there is no option to define references when saving part as "Mirror part". You can vote for IDEA submitted by Steven at http://communities.ptc.com/ideas/3815
View ArticleRe: Stack the range variables
You need to use stack, with two submatrix functions as arguments. Assuming ORIGIN=0 use this function: NewV(V,s1,s2):=stack(submatrix(V,0,s1-1,0,0),submatrix(V,s2+1,last(V),0,0)) If 131 and 200 are the...
View ArticleRe: Mass properties in assembly?
Hi Haris, When calculating mass properties of assembly, calculation will convert the units (internally and no physical change in part units) of parts to get results in assembly units. For e.g. three...
View ArticleRe: what causes the FOSI A31536 error?
Hi Jerry, Sounds like he may have done something with the in-editor stylesheet, which would still apply even though you're not using Styler for publishing. Editor ships with a version of Styler that...
View ArticleRe: 'Check in As' multiple topics
Hi Avishekh That sounds like an SDL Live Content issue. Check with your rep or SDL technical support. Liz
View ArticleRe: Title problems in SGML
Hi Vickie,No way to know without looking at the FOSI. Look into how the underline is applied in the subpara titles. PTC never guarantees fidelity from one version to the next, and there have been a LOT...
View ArticleRe: Incorporate XSL-FO data in ".style" file
Hello Gareth, Thank you for your informative advice. I was kind of hoping that the copy/paste would work but now I understand it is difficult.So if you want to achieve the layouts that cannot be...
View ArticleRe: Creo View popping up 3D Connexion Properties Window?
Nope, we abandoned it and our composites engineer went back to using Catia
View ArticleRe: Creo View popping up 3D Connexion Properties Window?
Interesting. We are looking into Fibersim but currently do everything by hand in Creo. I hear Catia is much better in these regards.
View ArticleRe: x value at which the function is max, and the maximum function value
So its as I suspectd - the value of ORIGIN in your sheet is changed from the default 0 to 1.So you have to apply the changes as given in my post above.
View ArticleRe: Creo View popping up 3D Connexion Properties Window?
FiberSim has an interface with Catia and NX so users can work directly in the native tool. They've approached PTC about developing the same, but have gotten no interest. Here's the full...
View Article