Clik here to view.
Re: Making a mirror part
You can create a mirrored component in an assembly, keep all the features, and break dependency.
View ArticleRe: Solve Block Error!
You have 26 equations, you are solving for 25 unknowns. For Find, the number of equations must match the number of unknowns.
View ArticleClik here to view.
Re: Feature Failure with Repeating Patterns
Jeff Wickham wrote: After wrestling with Creo off and on for four weeks to create this part, those dumb solids are looking a whole lot like smart solids. So, what are you trying to do? Aren't there...
View ArticleRe: Is Creo 2.0 certified on Windows 8.1 yet?
Hi Todd, Creo 2.0 M100 is supported on Windows 8.1.
View ArticleRe: Making a mirror part
There are some useful tips in this thread too:Solid Geomentry Mirror in Creo-2??
View ArticleRe: bend unbend of hollow pipe
Search for "Pro/ENGINEER Wildfire Tutorial, Spinal Bend, Understanding the Possibilities" from E-cognition on YouTube.
View ArticleRe: Where used report for Users?
There is the possibility to do this with Query Builder, which you can access from Site>Utilities>Report Manager. Here is an article that contains the report listing all contexts and roles for...
View ArticleRe: Feature Failure with Repeating Patterns
I messed with this one a little, I'm not sure what CELL and TUBE are. Also loading this posted model, cell=1 and tube=cell/15 versus the 2 and /10 shown above (again I'm not sure what these are...
View ArticleClik here to view.
Re: System of digits in Mathcad
We sure can find examples of clockfaces for both notations.See below some from St. Stephans in Vienna, Rolex and the last ones from Café Ziferblat (ziferblat.net) in Moscow, where you don't pay for the...
View ArticleRe: Feature Failure with Repeating Patterns
I defined the cell as in the size of the full matrixed sub-structure (pattern 1). So the beginning feature is driven by CELL/2 relations for the features.Tube is the diameter of the tubes, rods, or...
View ArticleClik here to view.
Re: System of digits in Mathcad
I see Roman numbers... on my dacha.It is one case when the usung (write on wood) Roman numbers is more simply then the using Arabian numbers.
View ArticleClik here to view.
Creo Sheetmetal Unbend Feature Failure
Hi, We are trying to unroll tubes from a chassis created in the AFX extension in order to produce templates for tube notching. The way we do this is by opening up the part for the tube and...
View ArticleClik here to view.
Re: Making a mirror part
Load your part into an assembly as shown below. Select Mirror. Choose how you want to mirror the part. You can mirror it with features.
View ArticleRe: Creo Sheetmetal Unbend Feature Failure
Flat patterns can be very fussy. You need to go in and redefine the flat pattern and see if you can find the error. I tend to use the bend and bend back more often for simple operations such as this.
View ArticleRe: Creo Sheetmetal Unbend Feature Failure
Try changing the part accuracy, possibly to absolute accuracy so that it matches across all the parts in the assembly.
View ArticleRe: Mathcad 11 or Mathcad 14 running under Windows 7?
Hallo, Valery,thank You for Your quick answer. I will try my MC 14 with a new Windows 7 OS.Greetings from Wolfgang
View ArticleClik here to view.
Sketcher difficulties
I need to creat this image. I know I am probably making it harder then it is. I can get everything but the 80 radius. I'm not sure how to have both the 40 and the 80. I've tried a variety of things and...
View ArticleRe: Creo 2.0 Student Version License Failure
how can i get new student verison license file where should i buy and can i buy online new licese
View Article