Clik here to view.
Re: Rayleigh-Ritz/Galerkin method with MC14 and ODESolve
Not sure what the main question is as I am still confused about the "copy to another sheet"!?As I see that the Odesolve throws an error, maybe doing as follows will do the job - I didn't wait for...
View ArticleRe: OOB Access Policy issue. Do I need to create multiple Deny for each state?
OK - there are some OOB Policy that allow all "Team Members" access to all WTDocuments, EPMDocuments and Parts. Once I deleted those I was good.
View ArticleIs Mathcad to Inventor/Solidworks integration coming back
Am familiar and used to the capability between Inventor/Soliworks and Mathcad 15 on a 32-bit machine. In trying to keep up with the times this funcitonality is no longer available. Does PTC intend to...
View ArticleArbortext to Documentum WDK Adapter
Currently we are running on XP, where Documentum Desktop 5.3 can be installed. We are looking at upgrading to Windows 7 where desktop is not compatible. We've found that we have to upgrade to the WDK...
View ArticleClik here to view.
Re: Why does PTC insist on Ribbon Interface? Over 40% strongly dislike!
Well Dave, if you only do part and assembly modeling, you really can't have experienced the rubbish that is the ribbon. I'm on creo, and it is the worst interface I've seen in the 16+ years I've been...
View Articledread the measure tool in creo 2.0!
i totally hate the new measure tool in creo 2.0. later in the day i will update this discussion with some jpegs from creo 2.0 and also compare it with one in wildfire 5.0....
View ArticleClik here to view.
Re: Why does PTC insist on Ribbon Interface? Over 40% strongly dislike!
Frank Schiavone wrote: Well Dave, if you only do part and assembly modeling, you really can't have experienced..... You asked for opinions, don't bash the guy cause he doesn't agree with you.
View ArticleRe: Why does PTC insist on Ribbon Interface? Over 40% strongly dislike!
i don't like the ribbon interface either. in my opinion they should have atleast kept it the wildfire way. primary reason being i guess that we all are so used to that kind of interface. now i have...
View ArticleRe: conncurrent engineering
Hi Actually we use windchill PDM LINK 10.0 And creo/elements pro 5.0 Let me know how to work on it? regardsViswanathan.K
View ArticleClik here to view.
Re: Why does PTC insist on Ribbon Interface? Over 40% strongly dislike!
Not bashing anyone, just pointing out that if he hasn't had to use the abomination that is the drawing ribbon, he really can't give an opinion on the ribbon. From what I've seen, there really isn't a...
View ArticleClik here to view.
Re: Help! Equation Solution Request.
Some things just don't transfer to Creo easily. I went through 4 iterations to make this work, only to go back to the original to have it come out properly. Since you cannot start out a VSS at zero, I...
View ArticleRe: Window Blacks out
This is a driver issue. I had the same problem with the latest NVidia drivers on my Dell Precision with the Quadro M3000. I updated to the Dell driver and it worked. None of the NVidia drivers...
View ArticleClik here to view.
Re: dread the measure tool in creo 2.0!
Maybe I'm missing something in the discussion here, but you can take new measurements from the same source. Select the reference to be replaced, right-click and select "Replace". After that, the...
View ArticleRe: Creo 2.0 Ribbon, as Annoying as Ever
That would be great! If users could show PTC that the ribbon is actually decreasing productivity, maybe that would cause them to eliminate the ribbon or at least rethink the layout and functionality.
View ArticleRe: What is PTC's solution for the growing composites market?
Below, I've posted the response I got after talking to Leigh Hudson from FiberSim. Essentially, PTC has yet to develop the interface with FiberSim that facilitates getting a solid mass model from...
View ArticleClik here to view.
Re: Matrix function Issues
The way you used the range variables and defined your vector singly is a bit irritating. You have to be aware that Mathcad would begin the index count of vecors and matrices by 0. Thats the reason your...
View ArticleRe: Why does PTC insist on Ribbon Interface? Over 40% strongly dislike!
Dave, People at your company are lucky to have someone like you to support them. Imagine those people who do not have much experience with PTC products or those who migrate from a different CAD system....
View ArticleRe: Why does PTC insist on Ribbon Interface? Over 40% strongly dislike!
Have all tools in one tab defeats the purpose of the Ribbon UI. Wouldn't you agree?
View ArticleRe: Why does PTC insist on Ribbon Interface? Over 40% strongly dislike!
Thanks for the kind words. Now, off to pushing for the Mac OSX version... Have a great weekend.
View ArticleRe: Why does PTC insist on Ribbon Interface? Over 40% strongly dislike!
As I have mentioned before, doesn't having everything under one tab defeat having the ribbon in the first place? What do you do if you have to measure something while you are in Sketcher? Don't you...
View Article