Re: How can I distance a circle from the surface I am putting it on?
I think you will find what you wanted orginally in the Blend feature. This allows you to define offsets between sketches. You can use taper in extrude but it only takes angle references. You would...
View ArticleRe: I don't know the reason error is generated
jinsuk Lee wrote: Thank you for advice.But I am sorry because I don't understand well.So, Could you explain easily? Not sure how and what exactly. 1) I don't see the "division by zero error" you are...
View ArticleClik here to view.
Re: Modelling a suction cup
Steve,Is this what you are after? The offset of DTM1 controls the 'squash' of the cup shown below as a section.Model attached.
View ArticleRe: How can I distance a circle from the surface I am putting it on?
I tried using these in my copy of Creo Parametric 2.0, but due to a glitch, this glitch http://communities.ptc.com/thread/56970 So I need to get that fixed first, because these were created in a...
View ArticleRe: Trigger: abortScript() boolean parameter senseless?
Hello Jens, From the JavaDoc for abortScript(...) (underline is mine):Exits the script and optionally aborts the transaction. Abort the transaction via this method when theend userhas made an error. If...
View ArticleRe: Column Widths in Styler Sheet changed from pi to px, how?
Column widths are converted to pixels in HTML type output, but as you note picas are being viewed as a 1 to 1 conversion. This is incorrect.1pi should be 16pxCorrect conversions for points is 1pt=1.3px...
View ArticleRe: How do we include, and access, our own JavaScript code in the WebClient?
Hello Sean, The only part of the product that supports any sort of custom JavaScript is reports. The main reason for this appears to be related to security concerns. Please open a case with PTC...
View ArticleRe: Arbortext Editor 6.1 error while printing
Arbortext considers <row> to be an element used in tables for most dtds.Is <row> supposed to be part of a table in your dtd? Many documents require as a minimum the following table...
View ArticleRe: How do we include, and access, our own JavaScript code in the WebClient?
Thanks, Kael... I'll enter a case for this. -Sean
View ArticleClik here to view.
Re: in MKS Source : Transforming a folder in subproject
This has been captured in CS186912. (Actually, it's from a case that pre-dates our current KB, but it's effectively the same as Matthias' answer. I expect Lionel will shortly be marking Matthias'...
View ArticleClik here to view.
Re: Green box in drawing in place of the actual view of the model.
In this situation you may want to take a look at "Drawing Program" under the Tools tab: "Define states" menu allow you to select which view to show or hide for a given state."Edit Program" is where you...
View ArticleRe: Integrity Export to Word doesn't work as I want
Hello Sebastian, I believe Matthias is correct. The suggested workaround for this is to use a a table without borders. The table should have two cells, side-by-side. In the first cell insert the...
View ArticleRe: How do we include, and access, our own JavaScript code in the WebClient?
For anyone else interested in this functionality, pease contact PTC Integrity Support to be associated with feature request RFC 997194/CS186914: Is it possible to make custom JavaScript functions...
View ArticleRe: Sheets
Hello Edna, I suspect this question belongs in the Community for one of our CAD products. Which project are you using? Regards,Kael
View ArticleRe: Anyone else have detailing issues in creo........
Thanks Martin and Dave. I will look into changing that config option. As to the drawing tree, once I found it we did find the "hidden" dimensions, thanks. I will have to blame this one on my lack of...
View ArticleDrawing Management by Projects
I am new with Creo Schematic and I am trying to understand if there is a way to manage drawings by Project inside CREO Schematic without using Windchill, a kind of project manager where you can...
View ArticleClik here to view.
Re: Sheetmetal - Blend -> Sheetmetal
I think the challenge for parts like this is to make the flat pattern setup efficient for shear and punch operations. For instance, the shape would be very different if you cut the flat pattern...
View ArticleElectrical Components Libraries
I am new with Creo Schematic and I am trying to find a place to know how is build the component libraries inside CREO SCHEMATIC, topics like kind of components, manufacturers, components standards...
View ArticleRe: Sheetmetal - Surface need to thicken
The Blend feaute became the 1st feature so it gives you a choice for the offset direction and thickness in one go, and yes, it solidified directly and recognized all the bends.
View ArticleClik here to view.
Re: Sheetmetal - Surface need to thicken
This is the beauty of being able to work in the flat with extrudes while in sheetmetal mode. I can optimize the punch setup by having long shear lengths and only 1 angle square punch. Of course,...
View Article