Clik here to view.
Re: Failing to enable AFX feature
Make sure while installing Creo you checked Advance Framework to be installed and have the license for framework in Creo. If it was not installed, you need to install this from installtion media.
View ArticleHow to make a tab your default tab Creo 2.0
I have created a tab for my model and drawing and I want Creo 2.0 to open up with this tab pre-selected not like the layouts tab in the drawings.
View ArticleRe: Segment Violation Errors
Hi Sandra, Nothing specific - however, we sometimes found that we got errors when producing tagged PDF's, and deselecting that option sometime makes it more stable. I believe a lot of work went into...
View ArticleClik here to view.
Re: Failing to enable AFX feature
Thank you this is a beautiful site to share knowledge
View ArticleClik here to view.
Re: Failing to enable AFX feature
everything went right upto the edit option but the advanced framework option didnt show up.. would you help me with this sir? what might have gone wrong? my installation process or anything?the image...
View ArticleRe: Modelling a suction cup
I am interested in manually moving the flexible part of the suction cup to see how it lays against a flat surface. I don't need motion animation.
View ArticleHow can I distance a circle from the surface I am putting it on?
I am quite new to creo parametric 2.0, and I am making a 5.56mm bullet case. However, to make the rim, I am making a circle for the extractor to hold onto. However, when I use the "Normal" dimension...
View ArticleRe: ProE Wildfire 5.0 Student Edition Lincence Lost
thx, got everything I needed, works perfect! Best regards
View ArticleClik here to view.
Re: Failing to enable AFX feature
Thank you Mr.Mahesh Sharma finally got what i needed thank you so much
View ArticleDefault Skeleton Color (Transparency)
Creo2 M080 I’d like to change the default skeleton model color, or more accurately, the transparency. The default blue is OK, but making it 75% transparent seems to help in working with it. I’ve found...
View ArticleRe: Repairing the imported data gives me headache :(
I looked at the file and tried some quick things on it. I would say you can remodel it from scratch faster then repairing it. Someone beat it with the fillet bat and that's where a bulk the errors are.
View ArticleRe: How can I distance a circle from the surface I am putting it on?
I tend to prefer revolve over extrude for cylindircal profiles other than a straight cylinder.
View ArticleClik here to view.
Re: How can I distance a circle from the surface I am putting it on?
No, I don't want that dimension though. Let me show you what the 5.56mm case should look like.Right near the back, the rim, E1 8.43, THAT is what I am trying to make.
View ArticleRe: How can I distance a circle from the surface I am putting it on?
I would revolve that. Although, I am confused about what you are asking because it looks like you have the dimension you want in your screenshot. And backing up, I would extrude (or revolve) the main...
View ArticleRe: Twist in blend
Also make sure the section you want to change the start point on is selected.
View ArticleClik here to view.
Re: How can I distance a circle from the surface I am putting it on?
I take it back, with all the diameter changes, I would just revolve that whole profile.
View ArticleRe: How can I distance a circle from the surface I am putting it on?
That´s a little confusing Andrew... If you´re using the revolve feature (in your previous image) it seems you´re choosing the wrong plane. For a part like that, I would use a single revolve feature to...
View ArticleRe: I don't know the reason error is generated
Thank you for advice.But I am sorry because I don't understand well.So, Could you explain easily?
View Article