Re: Infinite Series Convergence, how?
Lou Poulo wrote: I didn't think that the symbolic processor would calc a numeric result for an infinite sum. Its capable to do so in some cases - e.g. if we omit the "-0.5" we get Zeta(3/2) (as I...
View ArticleRe: How to Flatten Quilt a Semi-Spherical Surface
The reason there isn't a flat pattern solution is that there is not a on-to-one correspondance in distances between points on the neutral plane in the formed part and any possible flat pattern. The...
View ArticleRe: [Noob Question] How do I reorient my object?
Thanks! I will try this. However I also need to create an orthographic drawing and my assembly is still not oriented properly for that. Should I just hand-pick the views instead of automatically...
View ArticleRe: [Noob Question] How do I reorient my object?
Hi DaleSorry, I meant to say it's an assembly. How would I go about reorienting my first part? I'll give it a try though and play around with it. Thank you very much!
View ArticleClik here to view.
Re: Font to use in drawings
Hmmm, does it increase the size only IF you make it searchable text? I remember getting some huge PDF's, but I didn't get too crazy comparing things.
View ArticleRe: IsoDraw macro change_line_color
This macro works great if you always know the pen name, but is there a way to make it search all pens and change there color reguardless of the name?
View ArticleRe: Mapped Mesh on Fillet
I need to see if it is ok to upload my clients model (which I think is doubtful). In the meantime. If you created a tube with an OD of .362" and an ID of .263" then added a .010" radius to the id on...
View ArticleRe: Mapped Mesh on Fillet
Oh....I forgot. I cut the assembly in half so I could apply a symmetry constraint.....
View ArticleRe: sheetmetal: "remove material normal to both driving and offset surfaces"...
you have to log a case. go to ptc support section.
View ArticleRe: Creo and Windchill integrated window freezes...
Hello Sudip, yes. We face the same problem with Creo 2.0 M070 and Windchill 9.1 M070.We have been struggling with this since January 2014 but we didn't find a solution. PTC Support was'nt very helpfull...
View ArticleRe: how to improve 3D modeling of circle
I do not find this options in créo elements/direct modeling 4.0. I have missed something. But i got a free version to prototype an 3D impression. Bur by the way, Créo is very easy to use, it is a...
View ArticleClik here to view.
Re: how to improve 3D modeling of circle
Adjust the Facets in the part properties dialog. The other answers you recieved relate to Creo Parametic. This question really belongs in one of the areas shown below.
View ArticleRe: Mapkey using right button menu
Are you selecting a model before calling the mapkey? I tried the same here and the mapkey worked fine. mapkey test ~ Timer `UI Desktop` `UI Desktop` `popupMenuRMBTimerCB`;\mapkey(continued) ~ Close...
View ArticleMathCad Prime 3.0 functions
I just upgraded from Prime 2.0 to 3.0 and noticed that the function list for Fourier Transforms no longer contains FFT, fft, IFFT, ifft, cfft, CFFT, icfft, or ICFFT. Is this a known issue?
View ArticleRe: surfacing
Thanks SteveThat does work but was just trying a different way by just creating a small patch surface. I projected a sketch onto the surface but don't know how to trim surface leaving just a small...
View Articleparallele Kante auf Arbeitsebene erzeugen wie?
Hallo zusammen, ich habe auf der Oberfläche eines Körpers mit Freiformkurvenbegrenzung eine Arbeitsebene gelegt.Auf dieser Arbeitsebene habe ich die Freiformkante des Körpers mit "3D-Geometrie -...
View ArticleClik here to view.