Multi-Language drawings in Productview - How to?
*I have posted this topic in the Manufacturing area, but did not have any replies in over a year. I hope this Visualization area will be better suited for this question* Hello, I would need advice...
View ArticleRe: How to integrate MS excel with creo 2.0.
Refer to this link, http://www.ptc.com/cs/cs_26/howto/beh11983/beh11983.htm,
View ArticleRe: Numeric inaccuracy - bug? (MC15 and Prime)
You are right. I was using the default display settings. Changing to the max digits gives your results. The problem does not ocurr with 14 decimal precision.
View ArticleRe: Feature Failure with Repeating Patterns
I did not have time to mess with this today. BUT I see you posting about file size, which is an issue, but I am more concerned with the horrible regen times. And it does not even peg the CPU, not even...
View ArticleRe: Delete void row in repeat region
Mauro, my guess >>> an empty row belongs to suppressed component SDF010VN<0DF010PG_G>.PRT I am not sure, but you can delete this component (during test) and you will see ... Martin Hanak
View ArticleClik here to view.
Re: Can you make a closed and tangent-to-itself datum curve in Creo 2.0?
Paul, you can add 2 points where you make the curve segment straight on both ends (choose the line option for that segment). This will make the ends of the curve tangent as well. The 3 points on top...
View ArticleRe: Can you make a closed and tangent-to-itself datum curve in Creo 2.0?
I do see what you mean about a sketch not behaving once you close the spline. The way around it is to divide the spline somewhere along the spline and letting that be tangent. You can then close the...
View ArticleClik here to view.
Re: How do I convert a value from ANSI to ISO format within a table cell
I know there is a setting for making metric (SI) dims with commas, but I am not sure that is the case with equations in relations or even parameters. Look for decimal_marker in drawing .dtl settings,...
View ArticleRe: Can you make a closed and tangent-to-itself datum curve in Creo 2.0?
The little glitch will be much smaller when a decent number of points is chosen. They should be much closer together where the curvature is higher to better follow the surface. I thought there was a...
View ArticleClik here to view.
Re: Can you make a closed and tangent-to-itself datum curve in Creo 2.0?
You'd think that's true, huh I tried that but if it is a single spline in a sketch, it jumps to closing the spline even if you have other geometry there. The Datum Curve version doesn't do that...
View ArticleRe: Can you make a closed and tangent-to-itself datum curve in Creo 2.0?
The end points don't start out with the end points coincident... That's after the tangency is established.
View ArticleClik here to view.
Re: Is it me or has PTC lost it's way
After reading all these posts tonight I have to say the "frustration" expressed by everyone is very real and very familar. I am in no way trying to mitgate the validity of the issues. Take my ideas as...
View ArticleRe: Can you make a closed and tangent-to-itself datum curve in Creo 2.0?
Nope, it overwrites the tangency with the lines and creates a tangent to itself. When you later divide the spline, the tangency to the construction lines reverts back See if this video covers it....
View ArticleRe: PTC System Monitor Release 3.0 F000 is Now Available!
Folks need to know about the Fatal error that Windchill Clusters have if All items are not uninstalled and/or upgraded properly... :/ I learned the hard way. Still a huge fan! Awesome product! CS119636
View Articleunit problem-rad/s to Hz,1/s
I'm new to MathCad,And I have some dificulties When I try to calculate natural frequency for a system.I find the unit can not convert rightly from rad/s to Hz,As you can see in the attached...
View ArticleClik here to view.
Re: MathCAD URGENT
Many people here scan all Mathcad relevant subspaced so there is absolutely no need to crosspost in three different areas, even though you may consider your question as exceptionally important.If...
View ArticleRe: Can you make a closed and tangent-to-itself datum curve in Creo 2.0?
No sweat - it's better than my videos. In the days before Intent Manager it was often a challenge when nearly vertical or horizontal line segments were required. One would have to exaggerate the...
View ArticleRe: asyncoremt.dll file is missing
Hi AllI have also come across this issue (asyncoremt.dll missing). In fact its quite common in my environment where i would say 75% of the machines ive installed in on give this error. (I install it...
View ArticleRe: asyncoremt.dll file is missing
You can always move the file to the windows folder where all the other .DLL files reside. It will probably throw up a second error with a different file... do the same again.
View Article