Simulation Licence for Creo
How are you doing test simulations in Creo 2.0, because when we open up PTC Simulate it says we do not have the proper license. Is there any other way to simulate in PTC Creo 2.0 or another softwear?
View ArticleRe: How to properly use constraints and rules followed by Mathcad's Solver
Hi Alan, Thanks, I missed the alpha change that must have happend when I was playing around iwth it. With that being said is there any way to get the solver to display multiple possible solutions if...
View ArticleClik here to view.
Re: total_sheets
So please cross out 'cheat', and instead of it answer a question: is there any 'smart' way to show parameter in drawing that will be calculate in a following way: my_total_sheets=total_sheets:d -1;? In...
View ArticleRe: total_sheets
No. It isn't smart to show that. The result you are looking for can be obtained by paying PTC for a custom solution. Your sales rep should be delighted to help.
View ArticleRe: total_sheets
Again, I think the answer is no. Without drawing relations, there's no way to control this. You also cannot access the total sheets external to the drawing. In a situation where you have two...
View ArticleRe: total_sheets
David, I don't know if you have access to ptc.com/support - but if yes, please look at Case Details - 11764712. I work in VAR company, and unfortunatelly I was asked by customer to find sollution for...
View ArticleClik here to view.
Re: Selection Tricks/Workarounds?
For isolating components, you can: 1 - Select Components (Graphic area, tree, find tool, etc.)2 - RMB->Set Representation To->Master. It only works if the simplified rep is unchanged, but is...
View ArticleRe: Application configuration file open error
Martin, Thanks for trying, I have to sit and wait for our IT to respond unfortunately.
View ArticleRe: Product idea - numeric on screen keypad
I had to look up a 20 button mouse. I assume you mean this Logitech G600 gamer mouse. That's crazy.
View ArticleRe: Mathcad Rounding numbers before calculations
Hi Salim, As I remember this it's related to an old comma/dot bug in Mathcad. Maybe you can get your Mathcad to work properly with decimals again by switching Windows to use dot as decimal separator....
View ArticleRe: 2D Plot Help Required
Attached is a sheet showing how to solve and plot numerically. (M15 format) Alan
View ArticleRe: How to delete/hide weak dimensions?
The weak dims are still controlling geometry and are therefore necessary. If you don't want them, you need to add other constraints or dimensions to constrain the sketch so that they are no longer...
View ArticleRe: How to delete/hide weak dimensions?
I thought the better method was the way PTC set it up - make the weak dimensions almost the same color as the background so they were not noticeable. It should be easy enough to match the weak...
View ArticleCreo View Express (problems)
I haven't used this much before. I want to solve one or both of these two problems: When I open a newly exported PVZ file in Creo View Express, I get annotation boxes floating in space. They look like...
View ArticleRe: Drawing dimensions colour Change
I'm not sure where to change the color of unattached dimensions. The color is there as a warning that the dimensions no longer represent any geometry. If you reattach the dimensions, they will use the...
View ArticleRe: How to delete/hide weak dimensions?
I think the best way would be the option to turn the automatic constraints off (yes, I know there's a setting, but it doesn't 100% work) and force you to manually add the constraints. that way you...
View ArticleClik here to view.
Simulation of contact between unusual shaped bodies in mechanism ?
Hello, I'm facing a new challenge as I have to simulate (or, at least, animate) the behaviour of an assembly based on a cam-follower system. I have defined all needed connections of the main assembly...
View ArticleRe: Flat pattern sheet metal drawing
Antonius is correct.Perhaps if you are talking about sheet metal that is rolled 360°, then you can use the sheet metal module. Steve
View ArticleRe: IllegalAccessError while accessing sessionContext object.
If what you want is the user name associated with the current method context, then the code snippet I gave should work as well. SessionContext.getContext() is supported, but do note what the Javadoc...
View ArticleRe: Application configuration file open error
We have determined that the installation files on our network are corrupted and are attempting to refresh the files.Hopefully this will solve the problem.Installation across out network is probably the...
View Article