Re: Get parent when creating WTPart
Kaushik, in my task child part number depends on parent part number.Is there any way to get parent number?
View ArticleRe: Get parent when creating WTPart
You can give task to Part creator to select the parent part. Create one IBA for WTPart let's say ParentPart write picker for that attribute/IBA and use that attribute/IBA as prefix in OIR for Number....
View ArticleRe: Get parent when creating WTPart
Hi Vasiliy, Shreyas's idea is good but not sure whether it's feasible or not . Usually WTParts are created from some CAD application like AutoCAD,Creo etc.If that's not the case then you can do what...
View ArticleRe: proxy-settings in mksclient.properties
Hi Klaus, thanks for your answer. Unfortunately we cannot use your workaround, because we have a n infrastructure, where most machines are getting Integrity before the user gets his home-directory. And...
View ArticlePTC Creo 2.0 Academic Edition
Hi, Would anyone advise me if there is an error on the global shop site? The cost listed for PTC Creo 2.0 Acedemic - One Year Term License is $330 for Australia yet the same product is listed at $199...
View ArticleWhen Document is released , set version as A or B or C
In Windchill OOTB Installation , default version schema is A.1,A.2,A.3...B.1,B.2,B.3My requirement is , When the document is routed to lifecycle state "Released" document should be set to version as...
View ArticleRe: How can I get started client side scripting in Windchill?
Read following,https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS84709This may be userful.
View ArticleRe: polar to rectangular conversion in mathcad PRIME?
Werner the reply you provided was helpful but it does not do the job! I need Prime to have a function like cos(x), so that i can use it anywhere in the calculation steps. The method you provided is...
View ArticleRe: polar to rectangular conversion in mathcad PRIME?
OK. Werner can you make the output a row values, instead of column values for me? This will certainly be helpful compared to where i am at now. if the answer is in the form (20,40) it makes it easier...
View ArticleClik here to view.
How to get current model name when I create a Drawing?
HI For example,When I create a Part named "PTC_ER_123",next I will create a Drawing,And I want to reuse part name,that means drawing name is named "PTC_ER_123",Is that PossibleThanks a lot.
View ArticleClik here to view.
Decimal Places Change
Hi Folks, Is ther any option to change decimal places for all dimesions in one shot?
View ArticleRe: Decimal Places Change
Mark all dimensions. Then:Layout -> Format -> Decimal Place You can also use the Searchbar top right.
View ArticleRe: How to get current model name when I create a Drawing?
Not with normal tools. Just with customizations. I use a little Python-Script to do that.
View ArticleRe: How to get current model name when I create a Drawing?
Thank you very muchfor your quickresponse,It seems that I must deal with it artificial.
View ArticleRe: Decimal Places Change
default_dec_placesvalue (default = 2 for non-angular dimensions)sets the default number of decimal places (0-14) to be displayed in all model modes for non-angular dimensions. it does not affect the...
View ArticleRe: Problem bei der Installation
Hello Safa, you create AVI using tsc2 codec. Therefore I cannot replay it. Martni Hanak
View ArticleClik here to view.
Clik here to view.
how to get workflow process name when create promotion request
how to get workflow process name when create promotion requestsuch as following picture,how to get selected workflow name "Error Flow", "PE_Production..." or "RD_CAD_Promotion..." by API.thanks in...
View ArticleRe: Decimal Places Change
We can modify decimal places at one shot by using manual method. selecting all dimensions--->Right Click----> Properties---->Change Decimal places---->OK But i am looking for Default...
View ArticleRe: Decimal Places Change
Nope, it is set in the model configurations. I set mine to 4 in the model and when I create a drafting dimension, it is 4 decimal placed by default. I have this in my config.pro default_dec_places 4
View Article