Re: How to create a 3D plot of a solid defined by coordinates
If you don't mind a few extra lines her is another solution. Facettes in Mathcad's 3D plots are quadrilaterals which may degenerate to triangles or even line segments. So you will have extra lines in...
View ArticleRe: Video Tip: How to model a 3D chain drive in Creo (Pro/E)?
Firstly, this model looks terrific. Unfortunately, patterning along a curve is not accurate to how a real chain works. In a real chain, the distance between links is measured in a straight line...
View ArticleClik here to view.
Re: Video Tip: How to model a 3D chain drive in Creo (Pro/E)?
Here is what I'm talking about. Again, for most applications, you won't notice the difference, but I'd like to get 100%.
View ArticleClik here to view.
How to remove the default tabs"Structure" for a subtype of WTdocument.
Hi,colleagues, Could you help me in this case ?I need to remove this default Tab"Structure" in the object"Reference Document" WCTYPE|wt.doc.WTDocument|com.ptc.ReferenceDocumentThanks,
View ArticleRe: family table used in charted drawing
Is PN a model parameter? If so, just use "&fam.inst.param.PN". If you just want the instance name, use "&fam.inst.name".
View ArticleRe: family table used in charted drawing
Tom,It is a parameter "PN". Model -> Edit Parameters -> PNThanks, Dale
View ArticleClik here to view.
Re: Parametric square spring?
Silly me. I'm going to refer you back to a wrapped spring.Closed and Ground Spring - Alternative to Helical Sweep WF4 has a Wrap feature, right? The trajpar is didn't work nicely due to the high...
View ArticleClik here to view.
Re: I can't win
PTC wants you to buy the style extension! Of course they are messing with you Got a little more context to your challenge here?
View ArticleClik here to view.
Re: Flat pattern of a part which was created using a Swept Blend
This is what the cylinder part should look like in flat pattern. I am using the default Y-Factor. Notice that I used a revolve to get the initial shape. Then a rip to separate this; and the Split...
View ArticleClik here to view.
Re: family table used in charted drawing
Okay, I was steering you wrong. I was getting mixed up with assembly members. You need two separate repeat regions. (The first article you listed explains this.) The cell value for both repeat...
View ArticleRe: I can't win
It's okay, I was just venting. It was a boundary blend, 2 curves in one direction, 2 in the other. Tangency conditions on the two curves in the one direction. The kind of thing I've done a million...
View ArticleRe: Snap fit hook optimization
HelloMark, Is itpossible to outputaHTML reportwith the fullsimulation.Best regards. Denis.
View ArticleRe: Creo 2.0 Parametric Fatal Error encountered
HiI also have problems with my version of creo; here is my traceback-------------------------------------------------The trace creation timestamp is: Fri Aug 29 23:32:51 14The executable build...
View ArticleRe: Type equation first then evaluate with values
It's not an oversight, it's by design. A book doesn't have to calculate anything. Suppose on page xxx I have:a:=2b:=3 Area:=a*b So Area=6 Then on page xxx+5 I have:If a and b now take on the new values...
View ArticleRe: How can I set color of sketcher in creo 2.0
Thank you for your replying I will study your syscol.scl. Maybe keyman is BLENDED_BACKGROUND yes .
View ArticleRe: How can I set color of sketcher in creo 2.0
Thank you for your replying. Maybe I need to set BLENDED_BACKGROUND yes in syscol.scl
View ArticleHow to flatten the inner vanes of transit mixer drum
I have been trying to create the inner vanes of transit mixer drum. As you can see in the images one vane is clockwise and the other vane is anticlockwise which has been color coded green and yellow...
View ArticleRe: How to flatten the inner vanes of transit mixer drum
This is a perfect case for Flatten Quilt. Divide each piece as you want them cut, place a point along a flat edge, and use the default settings. You will find there is not a simple "radius" for a...
View ArticleRe: How to flatten the inner vanes of transit mixer drum
Oops Sorry,that is a double start helix in the same direction I meant the the drum rotates clockwise and anticlockwise thankyou for correcting me .I am a beginner to creo so can u give me an example...
View Article