Re: PTC University Skill Questions - Is this answer right?
Kate, Can you send me your model so I can review it? Thank you Michaellearning@ptc.com
View ArticleRe: Raeding in metadata from Windows folders
Hi Raiko, The fuction was actually posted a while back by Philip Oakley. However, you will need to change the path "C:\YOUR PATH" to point at the folder were you want to count the files. Then you will...
View ArticleClik here to view.
Re: curl character instead of space in Arbortext Editor 6.1 M020 or Styler
HubertIs Insert -> Symbol (Einfügen -> Symbol) what you're looking for? For autonumbering you can use Prefix/Suffix:
View ArticleRe: ASSIGNING START_ASM
The features from the template are copied into the assembly, where they could be modied, reordered or deleted without dependency to the template. So there is no direct way to replace the "start...
View ArticleRe: "works to product specification" - who writes these things???
I checked and problem also exists in Creo M110. We use a mapkey to do this whenever there is a problem. It is amazing the number of problems it fixes on old dwgs (we typically reuse dwgs via save as...
View ArticleRe: "works to product specification" - who writes these things???
This drives me absolutely batty. I recently had a case where after two weeks the tech says he found a solution and sends me an article. Problem is I already mentioned that article and how it doesn't...
View ArticleRe: Simultaneous equations not solving MathCad 15
You can place the statement "fshaft>0" somewhere in the solve block, but you will notice that it looks like it gets ignored. It treated like a soft constraint, so you can "weight" it by typing...
View ArticleRe: Moment of inertia
Here are the files if you are interested. The green bas and it's directly connected parts are not supposed to move. The setup is an air bearing. I need the moment of inertia of all the moving parts...
View ArticleClik here to view.
Re: "works to product specification" - who writes these things???
Ha! That is normally the second question I ask when I am on the phone with tech support
View ArticleRe: "works to product specification" - who writes these things???
I suspect it is like a registry-cleaner routine for scrubbing files and making them compatible again.
View ArticleRe: Moment of inertia
Initial thoughts are the first part needs to be fixed. There are two constraints on this part but it is still 'packaged' and free to move.
View ArticleRe: Part Cross-Section in Sketch
You want to "create curve from cross-section" from the datum submenu. Once you have that curve, you can project that into your sketch using the project feature in sketcher.
View ArticleRe: Moment of inertia
Also, the first part has no material applied to it. For a Mass Properties analysys you need to assign a material or density to every single component. Which parts was the material property greyed out?
View ArticleRe: Windchill 10.1 and Office 2013
Okay, the Office 2013 support at 10.1 M050 is official. TBH, I would not expect many issues at 10.1 M040.https://support.ptc.com/appserver/cs/view/solution.jsp?source=subscription&n=CS139353 I am...
View ArticleRe: How to delete the primarycontent of teh Document using api.
Hi yogesh, Thank you,It is Working. regards,Sandeep
View ArticleRe: Run Catia WGM with user privileges
What exactly is your problem - we run the WWGM on all of our user's CAD machines without them having Admin permisssions? Admin permissions are required to install the Application onto the CAD machine...
View ArticleRe: Mathcad Integration Options
You can write DLL's in C / C++ and link them into Mathcad, See the mathcad help files <Developers reference> for most of the information that you need.There are also a couple of example files to...
View ArticleClik here to view.
Re: Data syncronize by using component (mathcad 15)
This is the way I started & I am very happy to be able to pay it forward.It takes time to discover some of the facets of mathcad & I think that most (if not all) on the forum are still...
View ArticleCan we change the thread size created by hole feature using relation?
I want to change the thread size from M8 to M10 when the size of component increases. Currently I created two separate hole with M8 and M10 and activating it using pro-program when matches with...
View Article