Radau Solver error: this value must be a vector.
I get an error with Radau(init, x1, x2, intvls, D) as 'This value must be a vector.' I'm quite sure I made init and D vectors, and x1 x2 intvls ordinary numbers. Please see the attachment and tell me...
View ArticleRe: Radau Solver error: this value must be a vector.
Use the literal index for t.0, not the vector index.
View ArticleRe: Radau Solver error: this value must be a vector.
Thanks, Werner. That should be one of the problems. But it seems it does not let the solver back to work.
View ArticleRe: Radau Solver error: this value must be a vector.
The other problem is ths function is complex enough for the Radau, the difference between x1 and x2 need to be small enough to allow the solver work.
View ArticleRe: Sheet Metal Flat State Calculation difference between PRO-E & Inventor.
You stated: "After migration to PRO-E , for the same sheet metal component , after inputting the same k-factor value , we have a difference in the flat state value of the sheet metal component." What...
View ArticleRe: Radau Solver error: this value must be a vector.
Having re-written t0 as t.0, you need to rewrite t/t.0 (in both first and last terms of DD) as well, because Mathcad still thinks t is a vector. When you do this you get the error that the problem is...
View ArticleClik here to view.
Creating Assy Dwgs - Is there a way to pre-set the Simplified Rep?
When creating a new drawing (using a template) the Creo dialog forces one to specify an assembly; unfortunatley there is no way to specify which Simp Rep should be used. The default is to add the...
View ArticleRe: Component Sets in Placement Toolbar?
In later versions the Sets can be used in a family table instead of assembling multiple components and suppressing the ones that aren't used. I'm fairly certain that is the case in Creo 2; though sets...
View ArticleRe: Creating Assy Dwgs - Is there a way to pre-set the Simplified Rep?
There's a setting "open_simplified_rep_by_default" that may help; not sure about drawings, but it works like that in opening assemblies on their own.
View ArticleRe: Window Select parts in a Creo 2 assembly?
You can window-select components in assembly, when you set Selection Filter to "Parts". Then you'll be able to draw window around parts you want to select and it'll work as normal 2D selection. You can...
View ArticleRe: thread milling
Hi guys Thanks for the help,I havnt tried it yet as am still waiting for my multi thread cutter. Hopefully will be in Wednesday.Cheers mick
View ArticleRe: thread milling
Mick,The only thing I will say is take it slow and easy with lots of passes starting inside the thread diameter until you get some confidence. I would rather it take an extra 5 minutes to cut the...
View ArticleRe: thread milling
Cheers Steve,I've been wanting to do some thread milling for a while so I've got my chance. Will have a practice first ,does thread milling always start from the bottom of the hole ?
View Articlesomeone can repair heal the dimples that are corrupted?
Please see the attached stp file if you can.
View ArticleRe: thread milling
With Multi thread threadmills yes. Start from axis and exit from axis is your friend!! I would use it. Play with the parameters to see what they do.
View ArticlePresenting Multiple Languages in same Integrity 10.4 Prod Server
Hello All, I searched the forum and did not see any threads addressing this question, please refer me to a previous thread if this has already been discussed. Our group is looking to extend use of a...
View ArticleClik here to view.
How to eliminate weld sequence numbers from symbols.
To remove the weld sequence # from the reference tail on a weld symbol created with Pro/Weld, you need to edit the weld symbol and remove the reference text from the symbol. To edit a weld symbol,...
View ArticleRe: Possible to get bend radius in default bend_note?
I know there is a lot of emphasis put on automation by many companies and PTC has strived to help in this regard with built-in quality checks. I am an old school designer that doesn't rely on these...
View Article