Re: How to turn off surfaces in Creo Express View 2.0

Hello DV ,

I tested your files a little bit...

1. Problem can be reproduced on 74215_bd1.prt, only
2. I saved this part in Creo Parametric 2.0 M050
3. Now, Creo View Express displays 74215_bd1.prt correctly (I hope)

I uploaded 74215_bd1.zip...

74215_bd1.prt.53 ... saved in Creo Parametric 2.0 M030 by you

74215_bd1.prt.54 ... saved in Creo Parametric 2.0 M050 by me (no config.pro used)

There are two alternatives:

1. The problem is caused by Creo Parametric 2.0 M030 bug, which is resolved in Creo Parametric 2.0 M050.
   If this is true, then you have to install Creo Parametric 2.0 M050.
2. The problem is caused by some config.pro option.
   I suggest you to launch Creo Parametric 2.0 M030 without config.pro, save 74215_bd1.prt and open the new version in Creo View Express.
   If the new version is displayed correctly, then you have to locate the buggy config.pro option.

Good luck

Martin Hanak